The KT series large character inkjet printing systems allow any type of packaging or moving object to be marked with alphanumeric characters.
These systems use 7-dot (KT7) or 16-dot (KT16) print heads, and nominal character height ranges from a minimum of 12.6 mm to a maximum of 75 mm. Additionally, you can progressively incline the print head to fi nd the reduced character height you prefer up to approximately 50% of the nominal value, but only using the STP 700 model programming consul. Reliable and versatile, thanks to the use of highly effi cient solenoids and technology DOD (drop on demand); they represent the ideal solution to satisfy a wide range of printing needs.
1 to 4 heads with 7 dots can be managed or 2 heads with 16 dots; a combination of 7-dot heads and 16-dot heads can even be used at the same time. Due to its compact dimensions and universal installation position, it easily integrates into any type of production line or system to print texts, lots, the time and date. The wide range of inks available allow for application on any type of surface, such as: absorbent paperboard, wood, glossy paperboard, glass, metals, plastic materials, polystyrene, ceramic, brick, natural stones and more.
Control panels are simple and intuitive, allowing operators to attain complete mastery of the KT series printing systems in just a short time. In the event that only a marking device is requested (and not a printing device), a single dot head is used (KT1 monojet); the main application of this device is attributing the respective grade to ceramic tiles and natural stones using the print of diff erent sequences of programmable spaced dots.
Every diff erent sequence of dots is paired to an individual selection grade. GLOSSY PAPER BAG POLYSTYRENE TRAY ABRASIVE FOR TILES PRINT CYRILLIC